Register
Help
.
:Info:
Quote
Runtime Raid Reconstructor 4.02
Runtime's RAID Reconstructor will help you recover data from broken
* RAID Level 5 Array consisting of 3 to 14 drives
* RAID Level 0 Array (Striping) consisting of 2 to 14 drives
Even if you do not know the RAID parameters, such as start sector, drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in a virtual image (.vim), an image file (.img) or on a physical drive.
Unlike other products that require you to know the RAID parameters, RAID Reconstructor is not only a "destriper" but an "analyzer" as well. It finds the unknown parameters for you.
Once you created an image you can either mount it with Captain Nemo or use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with Captain Nemo or GetDataBack too or you might even be able to directly boot from it.
RAID Reconstructor is read-only
It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".
Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need all drives.
The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.
Take advantage of the scripting feature in RAID Reconstructor.
Based on the PASCAL programming language, scripts allow you to access your drives and process them with all the elements available in a higher programming language. For more information please refer to the build-in help file in the software..
Installation
1.Download The File
2.Follow The Instructions Written In The file Installation Guide.diz.
Note:My Upload Always Works And I dont like to serve any virus or trojen.So Enjoy.
Runtime's RAID Reconstructor will help you recover data from broken
* RAID Level 5 Array consisting of 3 to 14 drives
* RAID Level 0 Array (Striping) consisting of 2 to 14 drives
Even if you do not know the RAID parameters, such as start sector, drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in a virtual image (.vim), an image file (.img) or on a physical drive.
Unlike other products that require you to know the RAID parameters, RAID Reconstructor is not only a "destriper" but an "analyzer" as well. It finds the unknown parameters for you.
Once you created an image you can either mount it with Captain Nemo or use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with Captain Nemo or GetDataBack too or you might even be able to directly boot from it.
RAID Reconstructor is read-only
It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".
Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need all drives.
The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.
Take advantage of the scripting feature in RAID Reconstructor.
Based on the PASCAL programming language, scripts allow you to access your drives and process them with all the elements available in a higher programming language. For more information please refer to the build-in help file in the software..
Installation
1.Download The File
2.Follow The Instructions Written In The file Installation Guide.diz.
Note:My Upload Always Works And I dont like to serve any virus or trojen.So Enjoy.
:Download:
http://hotfile.com/dl/9846722/fac3bd5/Runtime_Raid_Reconstructor_4.02.rar.html
MultiQuote
